Finger-Jointed Tight Knot blanks or finished profiles contain selected
tight inter-grown knots and are present on both faces and edges. Finger-Jointed Tight Knot
is available in a range of pre-finished profiles, S4S boards and blanks.
Flight
Timbers Finger-Jointed Tight Knot
Grade Classification: Appearance Grade |
 |
Finished Dry Sizes: Available
in Pre-Blanked or S4S form
 |
| Nominal
Width: |
|
75, 100, 150, 200mm |
| Nominal
Thickness: |
|
25, 50mm |
| Tolerance: |
|
-1 / + 2 |
| Special Sizes: |
|
By negotiation |
| Lengths: |
|
In set length packs by
negotiation |
| Moisture Content: |
|
8 to
12% (average 10%) |
Grading Specifications
- Grading specifications based on each individual piece.
- Small inter-grown knots are permissible on two faces and edges.
Restricted Visual Characteristics
The following defects are not permitted under the grading specifications of Finger-Jointed
Tight Knot Grade:
- Pith is not permissible
- Sap Stain not permissible
- Brown Stain not permissible
- Surface Checks not permissible
- Heavy Resin not permissible
Treatment: Available treated and non-treated |
 PRODUCTS PAGE
|
|
