A distinctive appearance grade ideally suited in the manufacturing of high
quality furniture. Excellent recoveries of clear wood and select knotty grade are
achievable.
Flight
Timbers Furniture Grade (F Grade)
Grade Classification: Furniture Component Recovery |
 |
Finished Dry Sizes:
|
| Width: |
|
5, 100, 150, 200, 250, 300mm |
| Thickness: |
|
25, 50mm |
| Tolerance: |
|
-1 / + 2 |
| Special Sizes: |
|
By negotiation |
| Lengths: |
|
2.4, 3.0, 3.6, 4.2, 4.8, 5.4,
6.00m |
| Moisture Content: |
|
8 to
12% (average 10%) |
Grading Specifications
- Grading specifications based on each individual piece of furniture component.
- Each piece shall yield a minimum of 70% of its length in furniture. components with 80%
of components 0.600mm or longer.
- Unrestricted number of tight inter-grown knots.
- Maximum knot size 75mm in diameter or half the width of the board whichever is less.
- Knot checks permitted if not exceeding 3mm.
Restricted Visual Characteristics
The following defects are not permitted under the grading specifications of F Grade:
- Any defects exceeding the F Grading standards
- Pith is not permissible
- Sap Stain not permissible
- Brown Stain not permissible
- Surface Checks not permissible
- Heavy Resin not permissible
Note: No limitation of defects in the
sections between furniture components
Treatment: Available treated and non-treated |
 PRODUCTS PAGE
|
|
