The Mixed Clear Grade is a cominbination of the individual N01, N02 &
N03 Clear Grades. The Mixed Clear Grade shall contain a minimum of 50% in N01 Clears
Grade, 35% in N02 Clears, and a maximum of 15% in N03 Clears. The Mixed Clears grade
ideally suited in the manufacturing of high quality Clear Mouldings, Solid Clear Panels
and furniture.
Flight
Timbers Mixed Clears Grade (No1, No2 & No3)
Grade Classification: Appearance Grade |
 |
Finished Dry Sizes:
|
| Width: |
|
75, 100, 150, 200, 250mm |
| Thickness: |
|
25, 50, 75mm |
| Tolerance: |
|
-1 / + 2 |
| Special Sizes: |
|
By negotiation |
| Lengths: |
|
In multiples of 0.300mm up to
6.00 metres in length |
| Moisture Content: |
|
8 to
12% (average 10%) |
Grading Specifications
- Grading specifications based on each individual piece.
- Each piece shall be graded individually to comply with the standard grading
specifications for N01, N02 and N03 Clears.
- N01 Clears: Free of knots and defects on two faces and two edges.
- N02 Clears: Free of knots and defects on one face and two edges.
- N03 Clears Free of knots and defects on one face.
Restricted Visual Characteristics
The following defects are not permitted under the grading specifications of Mixed Clears
Grade:
- Pith is not permissible
- Sap Stain not permissible
- Brown Stain not permissible
- Surface Checks not permissible
- Heavy Resin not permissible
Treatment: Available treated and non-treated |
 PRODUCTS PAGE
|
|
